1. installation: in the process of installation, please refer to the interface dimensions of the technical parameters, avoid the foreign objects into the pump, and keep the import and export clean.
2. gas source quality standard: please choose the clean gas source to ensure the continuous and stable work of the pump.
3. air lubrication: pump at the factory, all moving parts have put a proper amount of lubricating oil, no longer need lubrication, such as the long-term use of dry compressed air driven, suggested adding amount of the lubricating oil in the oil cup two cis, for oil mist lubrication
4. gas pressure: the minimum driving pressure of the pump is 1.5-2bar maximum design drive pressure of 10bar. It is suggested that air pressure is used between 6-8bar. The pressure of the pressure regulating valve can be adjusted to meet the demand pressure. The driving pressure of the pump must not exceed 10bar. If it is driven through the pipe gas, there must be a reliable pressure relief valve and safety valve.
5. connection pipeline: according to the pump output pressure, flow, select the appropriate import and export connection pipeline, to ensure that the pump can bear the maximum output pressure, flow.
The maximum output pressure of 6, the pump is controlled by driving gas pressure booster, booster pump according to the ratio, pressure ratio was 25:1, the driving gas pressure is 6bar, the maximum output pressure of the pump is 6 25=150bar output pressure with air pressure were no adjustment.
I believe that after seeing the introduction of this article, we will have some understanding of the http://www.debradjwhite.com of gas booster pump. Later, we can solve some other problems well.