网站公告:

产品中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.debradjwhite.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯 - 气动增压泵的选择需要注意

气动增压泵的选择需要注意哪些事项?

发布时间:2018-07-30 16:46:10   发布人:http://www.debradjwhite.com
1.工作压力和流量
1. working pressure and flow
气动增压泵和动力单元的工作压力参照驱动气压为0.48Mpa时泵输出压力和流量。假设泵的最大输出压力大于所需的工作压力,这就要思索安全措施。关于最大输出压力,请参照产品目录中的“静态下驱动气压力和输出液压近似比率表”。动力单元的选型与泵分歧。关于工作流量,请参照产品目录中的“性能曲线图”。
The working pressure of the pneumatic booster pump and the power unit refer to the output pressure and flow rate of the pump when the driving pressure is 0.48Mpa. Suppose that the maximum output pressure of the pump is greater than the required working pressure, we must consider safety measures. For maximum output pressure, refer to the "static down drive gas pressure and output hydraulic approximate ratio table" in the catalog. The selection of the power unit and the divergences of the pump. For work flow, please refer to the "performance curve" in the catalog.
2.驱动气体的压力和流量
2. the pressure and flow of the driving gas
气动增压泵和动力单元在连续工作时运用的驱动气压不超越0.7Mpa,在间歇工作时可抵达1Mpa。在最佳性能状态时气动泵的耗气量,请参照所需驱动气体流量表。
The pneumatic booster pump and the power unit use the driving pressure not to exceed 0.7 Mpa in the continuous operation, and can reach 1 Mpa in the intermittent operation. For the consumption of the pneumatic pump in the best performance state, refer to the required gas flow meter.
气体增压泵
3.保送液体介质
3. delivery of liquid medium
气动增压泵泵保送的液体介质是气动增压泵的选型中着重思索的部分。液压部分的材质和液压密封圈是由保送的液体介质所决议的。泵可用油、水和大多数液体介质。标准泵的主要液压密封圈是丁橡胶和聚氨酯,单向阀座采用特氟龙密封。其它密封材料包括碳氟化合物和亚乙基丙烯,这些密封材料主要用于保送的特殊介质。请向工厂或当地的分销商咨询密封材料选型。
The liquid medium which is driven by the pneumatic booster pump is the part that is emphasized in the selection of the pneumatic booster pump. The material and hydraulic seal of the hydraulic part are decided by the liquid medium. Pumps can be used in oil, water and most liquid media. The main hydraulic seals of standard pumps are butadiene rubber and polyurethane, and one-way valve seats are made of teflon seal. Other sealing materials include fluorocarbon and ethylenepropylene, which are mainly used for special media. Please consult the factory or local distributor for sealing material selection.
4.气动增压泵可接受的体积和重量关于某些的应用,气动增压泵和动力单元的外形尺寸和重量也要重点思索。
4. The acceptable volume and weight of the pneumatic booster pump for some applications, the shape size and weight of the pneumatic booster pump and power unit should also be considered.
以上就是为大家介绍的有关气体增压泵http://www.debradjwhite.com 的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以最专业的态度,为您提供服务.
The above is a detailed introduction to the gas booster pump http://www.debradjwhite.com for you, I hope to help you. If you have any questions, welcome to contact us. We will provide you with the most professional attitude.

13188935873

qq

推一把28推百度